Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485mm

Modérateur : Dehas

Avatar du membre
ziggy95
Pilote toutes catégories
Messages : 1935
Enregistré le : jeu. 6 sept. 2012 11:56
Réputation : 0
Localisation : Près du lac d'enghien les bains

Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485mm

Message non lu par ziggy95 »

Image

Just when you thought that all multi-rotor frames looked the same...the X-4 FPV appeared on the scene and is breaking all the rules! Featuring fiberglass construction with ply reinforcement, the X-4 is super rigid yet lightweight. Its high gloss paint job is impressive to look at making it really stand out in the air.

This is the first purpose built fiberglass FPV multi-rotor frame on the market today and is very unique. It features a very large internal canopy space allowing for mounting of all your electronic components including your FPV system. It even provides mounting grooves for LED light strips on the bottom of the arms making it perfect to setup for night flying as well!

The unique fiberglass body design is beautifully finished and fully enclosed. It even includes top and bottom motor covers to hide all of the wires making for a super sleek and futuristic look.

The X-4 arrives mostly pre-built and with all necessary hardware. You will simply need to add your own radio system, brushless motors/ESCs, multi-rotor control board and lipoly battery.

Features:
• Unique full-body fiberglass construction
• Integrated clear canopy dome for FPV camera use
• Beautiful high gloss paint job
• Full body design makes for easy orientation while flying
• LED strip mounting grooves

Specs:
Width: 485mm (motor shaft center to center between front/rear arms)
Length: 685mm
Frame weight: 730g (w/out electronics)

Requires:
28-XX or 35-XX brushless outrunner motor x 4
25~40A brushless ESC x 4
10~12 inch propeller x 4 (2 standard/2 reverse rotation)
Multi-rotor control board
2200~3000mAh 3~4S lipoly battery
4CH transmitter and receiver
Modifié en dernier par ziggy95 le jeu. 25 avr. 2013 22:17, modifié 2 fois.


GLB Reptil, 1000 kv, apm 2.5, Gps, télémétry, Gopro3, Osd, Fpv
ZiggyWhite, KK2, 1000 kv, 8x4.5 en 4S
Arducopter Hexa Apm1, gps, sonar
Tri Talon, F450
T8FG, Cnc

Le mode acro est là pour aider à crasher nos multis, pas à les faire voler (L.Thall)
Avatar du membre
ziggy95
Pilote toutes catégories
Messages : 1935
Enregistré le : jeu. 6 sept. 2012 11:56
Réputation : 0
Localisation : Près du lac d'enghien les bains

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par ziggy95 »

Apparemment, c'est une frame très très lourde et on a du mal a imaginer le poids total avec tout le matos.


GLB Reptil, 1000 kv, apm 2.5, Gps, télémétry, Gopro3, Osd, Fpv
ZiggyWhite, KK2, 1000 kv, 8x4.5 en 4S
Arducopter Hexa Apm1, gps, sonar
Tri Talon, F450
T8FG, Cnc

Le mode acro est là pour aider à crasher nos multis, pas à les faire voler (L.Thall)
Avatar du membre
Andreas.L
Pilote toutes catégories
Messages : 1796
Enregistré le : lun. 21 mai 2012 18:20
Réputation : 0
Localisation : 74, près de genève
Contact :

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par Andreas.L »

Deja un lienn...
http://www.hobbyking.com/hobbyking/stor ... 485mm.html" onclick="window.open(this.href);return false;


Modérateur CrashTeam Approved
Avatar du membre
Dehas
Administrateur du site
Messages : 16171
Enregistré le : ven. 3 juin 2011 12:50
Réputation : 5
Localisation : Saint Dié des Vosges
Genre :
Contact :

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par Dehas »

Il est beau, mais 730grs sans rien, c'est une enclume pour ça taille.


Avatar du membre
Redeos
Pilote toutes catégories
Messages : 1469
Enregistré le : dim. 16 sept. 2012 03:17
Réputation : 0
Localisation : Quévy-le-petit

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par Redeos »

+1 il est tres beau mais il faudrait obligé du 3000 4s. Tres lourde la bete!!! Dommage.


Avatar du membre
totof06
Octocopter
Messages : 510
Enregistré le : sam. 5 janv. 2013 17:07
Réputation : 0
Localisation : Le Rouret

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par totof06 »

Dommage je le trouve super jolie !!! un peu fabrication artisanale


Tbs Discovery Pro Dji Naza V2, Gps, SunnySky 2216 900Kv, 9x5
CGN Naza V1,Gps, SS 2212 980Kv
Qav Naze32, SunnySky 2212 980Kv, Hélice 8x5
Mini H CC3d, Cobra 2204 2300Kv
Image

Chaine YouTube
artdeschoix
Pilote toutes catégories
Messages : 3153
Enregistré le : lun. 18 févr. 2013 21:05
Réputation : 0

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par artdeschoix »

Bonjour ,
c'est vrai qu'il est beau ...
Mais je vous rejoins question poids : trop lourd !

@+ René 8|


Tarot FY 680 Pro - GPS Naza V2
DJI450V2 - GPS NAZA V1
Futaba T8FG/T14SG



Avatar du membre
Dehas
Administrateur du site
Messages : 16171
Enregistré le : ven. 3 juin 2011 12:50
Réputation : 5
Localisation : Saint Dié des Vosges
Genre :
Contact :

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par Dehas »

http://hk.rc-international.info/video/J8pPJu72wOA" onclick="window.open(this.href);return false;
Dommage, pas de vidéo en vol


Avatar du membre
mrnene
Pilote toutes catégories
Messages : 3030
Enregistré le : dim. 29 juil. 2012 03:11
Réputation : 3
Localisation : Enclave des Papes 84600

Re: Nouveau Quad chez HK : X-4 FPV Fiberglass Quad Frame 485

Message non lu par mrnene »

Moi j’aime bien ce genre de châssis, mais c’est vrai qu’il est très lourd, et puis avec ces châssis au moindre crash un peu fort, la cellule est foutue et il faut tout jeter à la poubelle, c’est dommage.
Mais j’aime beaucoup le look quand même :ghee:


DOOfpv truX220 4s Revolt V2 32khz /Chamelon 4s

http://www.youtube.com/user/84mrnene?feature=mhee" onclick="window.open(this.href);return false;
https://www.airvuz.com/user/84mrnene-FPV" onclick="window.open(this.href);return false;
Répondre

Retourner vers « Parler pour ne rien dire »